# Contractor Sidewalk Stamp Rules by City — Stamped Sidewalks

Some cities require the contractor's name and the year in every new public sidewalk. Here is what six of them say, each read from the city's own document or, for one, a news report. Rules change, so check your city's current spec before you order a stamp.

## Which cities require a contractor's name stamp in sidewalk?

Some do, and each writes its own rule. These are the ones we read in full.

The table shows what each document asks for: the wording, where the stamp goes, and any size, depth or material. Documents read 2026-11-11. If your city isn't here, that doesn't mean it has no rule.

| City | What it must say | Where it goes | Size, depth or material | Source |
| --- | --- | --- | --- | --- |
| Appleton, Wisconsin | The year it was built and the contractor's name | At the ends of each length of concrete sidewalk | The nameplate must meet Public Works standards before the city issues a license | Municipal code, section 16-61 |
| Fargo, North Dakota | The contractor's name and the year of construction | Both sides of every expansion joint, and at all termination points | Letters 1 1/4 inches high, deep enough to press 1/8 inch into the concrete | City specifications, section 2300 (revised 2014) |
| Kindred, North Dakota | The contractor's name and the year of construction | In the sidewalk the licensee builds | Letters 1 1/4 inches high, pressed 1/8 inch into the fresh concrete | City code, section 2-0106 |
| Wauwatosa, Wisconsin | "City of Wauwatosa", the year the work was placed, and the contracting company's name | The ends of each portion of concrete work: pavement, curb and gutter, sidewalk and driveway aprons | No size given. A missing or wrong stamp can mean removing and replacing the concrete | Standard specification 621 (revised December 2023) |
| Toronto, Ontario | The contractor's full company name, never abbreviated or a numbered company, and the year | At each end of the installation on each street block, or every tenth bay, whichever is less | Forged steel, with Gothic lettering at set sizes | Standard drawings T-310.010-7 (2024) and T-310.010-6 |
| Milwaukee, Wisconsin | A date and the contractor's name | Not stated in the report | Not stated in the report | WUWM news report, June 2016 (not the code itself) |

- Appleton Municipal Code, section 16-61 (PDF): https://appletonwi.gov/Documents/Legal%20&%20Administrative%20Services/Appleton%20Municipal%20Code%20inc%20Supp%20100.pdf
- Fargo specifications, section 2300 (PDF): https://download.fargond.gov/0/2014_concrete_sidewalks_and_driveways.pdf
- Kindred, North Dakota, sidewalk chapter (PDF): https://kindrednd.com/_files/ugd/4b7886_d5a5b5ce42aa4ea49ef92564c85fcd63.pdf
- Wauwatosa standard specification 621 (PDF): https://media.wauwatosa.gov/wp-content/uploads/2026/08/621-Concrete-Construction.pdf
- Toronto standard drawing T-310.010-7 (PDF): https://www.toronto.ca/wp-content/uploads/2024/10/957e-ecs-specs-roadwd-T-310.010-7-Rev4-Sep2024.pdf
- Toronto standard drawing T-310.010-6 (PDF): https://www.toronto.ca/wp-content/uploads/2017/11/8f8e-ecs-specs-roadwd-T-310.010-6_Rev2_Nov2014.pdf
- WUWM: why Milwaukee sidewalks have dates stamped on them: https://www.wuwm.com/regional/2016-06-17/why-do-sidewalks-in-milwaukee-have-dates-stamped-on-them

## Does a plastic stamp meet a spec that says metal?

Not if the spec names the material. Toronto's drawing calls for a forged steel stamp, so a plastic one doesn't meet it there.

Of the documents above, only Toronto's names a material. Appleton leaves the nameplate to its Public Works standards, so ask Public Works before you order. Fargo and Kindred set the letter height and the depth, not the material. Wauwatosa sets the wording and where it goes.

Our stamps are solid rigid plastic on a welded aluminum frame. If your spec says metal, buy what it says, or get the engineer's approval in writing before you order one of ours.

## How deep and how tall do the letters have to be?

Where a spec says, follow it. Fargo and Kindred both ask for letters 1 1/4 inches high, pressed 1/8 inch deep.

Letters can be up to 3 inches tall. The smallest depends on the font: 1 inch in DejaVu Sans Bold, 1.25 inches in most of the others. Most of our fonts can set 1 1/4-inch letters.

Depth is where to look closely. Our stamps press 1/4 inch as standard, and 1/8 inch is available for cities that specify it, such as Fargo and Kindred, at the same price. Choose it in the designer before you order. A heavy broom finish softens a 1/8-inch impression; 1/4 inch reads better on rough finishes.

If your spec sets a depth that is neither, ask the city engineer which one is acceptable before you order.

## Why do cities require a contractor stamp?

So the city knows who built each sidewalk and when.

WUWM's 2016 report traces Milwaukee's rule to the turn of the twentieth century, when concrete sidewalks became common and the city needed to know who was building them. A stamp lets a city find the contractor if a sidewalk fails early.

- WUWM, June 17, 2016: https://www.wuwm.com/regional/2016-06-17/why-do-sidewalks-in-milwaukee-have-dates-stamped-on-them

## How do you find your own city's rule?

Search your city's municipal code and its sidewalk specifications for "stamp", "name plate" or "marking".

The rule can sit in the code's sidewalk chapter, as in Appleton and Kindred, or in the engineering department's construction specifications, as in Fargo and Wauwatosa. Toronto puts it on a standard drawing. If you can't find it, ask the engineering division that issues your sidewalk permit, and get the current version: specs are revised, and the one in your truck may be old.

## What should the stamp say if your city has no rule?

Your company name over the year reads well at a glance.

If your city requires the current year, order the name and the year as two stamps, so only the small year stamp needs replacing each January. The price follows the size: 60¢ a square inch, with a $100 minimum, before shipping. Order at least 4 weeks before your pour, or 3 with express shipping.

See the contractor name stamp: https://stampedsidewalks.com/stamps/contractor-name-stamp

## Questions

**Does the year have to be the year the sidewalk was poured?**
In every document above that names it, yes: Appleton says the year in which it was constructed, Fargo and Kindred the year of construction, and Wauwatosa the year the work was placed. A founding year like EST. 1998 doesn't meet those.

**Can the stamp show our logo instead of our name?**
Not where the spec asks for the name. Toronto, for one, wants the full company name and won't accept abbreviations or a numbered company. Our designer makes text stamps only right now, so the name is set in letters.

**Do these rules cover private driveways and patios?**
The rules above cover work the city regulates: public sidewalk, and in Wauwatosa's specification, curb, pavement and driveway aprons. On private work, the property owner decides, so ask before you stamp a client's slab.

**Will you make a stamp to my city's spec?**
We cut the wording, letter height and layout you set in the designer, and you approve the proof before we cut. Check our limits against your spec first: letters up to 3 inches, a 1/4-inch or 1/8-inch depth, and a solid rigid plastic plate.

Get a stamp: design one at https://stampedsidewalks.com/design (instant 3D proof and price, $0.60/sq in, $100 minimum per stamp).

---

- Design tool: https://stampedsidewalks.com/design · Pricing: https://stampedsidewalks.com/pricing · Templates: https://stampedsidewalks.com/templates
- Contact: https://stampedsidewalks.com/about · Order tracking: https://stampedsidewalks.com/track
- For agents: https://stampedsidewalks.com/llms.txt · MCP server card: https://stampedsidewalks.com/.well-known/mcp/server-card.json · Skills: https://stampedsidewalks.com/.well-known/agent-skills/index.json
